top banner
Home
/
Blog Center
/
Chargers
/
How to Charge Meta Oculus Quest/Quest 2 Controllers (2 Effective Methods)

How to Charge Meta Oculus Quest/Quest 2 Controllers (2 Effective Methods)

The Oculus Quest is a versatile and immersive VR headset that brings gaming, exploration, and virtual experiences to life without the need for cumbersome wires. Central to this experience are the Oculus Quest controllers, which serve as your hands in the virtual world, enabling precision and interactivity for gaming, productivity, and more.

Keeping these controllers powered is essential to uninterrupted gameplay, but how to charge Oculus Quest 2 controllers? This guide explores two practical methods to charge controllers for Meta Quest 2 or your Meta Quest: replacing their batteries and using a charging dock for seamless recharging. 

How Do You Charge Meta Quest 2 Controllers

Unlike controllers with built-in rechargeable batteries, the Quest 2 controllers rely on removable AA batteries. This means you can't simply plug them into a wall adapter to recharge when the power runs low.

However, you can use rechargeable AA batteries as an alternative to disposable ones. While the controllers themselves aren’t equipped for direct recharging, accessories like the officially licensed Anker charging dock provide a seamless solution. This dock not only recharges your Quest 2 headset but also supports the controllers, allowing you to recharge their batteries without constant replacements.

Here’s a breakdown of two approaches: using standard AA batteries and upgrading to a rechargeable solution. Let’s continue to learn the details. 

Method 1. Replace the Oculus Quest 2 Controller Battery

Here is how to change the battery in the Oculus 2 controller with new ones when they run out.

Step 1: Position the Controller

Hold your Oculus Quest 2 controller so that the small pop-up symbol on the plastic battery cover is facing upward and away from you.

Step 2: Remove the Battery Cover

Using your thumb, gently push the battery cover in the direction of the arrow or the groove. This will unlock the cover. Then slide it off the controller to expose the battery compartment.

Step 3: Take Out the Old Battery

Carefully remove the depleted AA battery from the compartment. Ensure you dispose of it according to local guidelines for battery disposal.

Step 4: Insert a New Battery

Insert a fresh AA battery into the compartment, ensuring the positive (+) and negative (-) ends match the polarity markings inside the compartment.

Step 5: Replace the Battery Cover

Align the battery cover with the slot and slide it back into place until it clicks securely.

Step 6: Repeat for the Other Controller

If needed, repeat steps 1–5 for the second controller to replace its battery as well.

Method 2. Charge Meta Quest 2 Controllers with Charging Dock

Wondering “How do I change the battery in my Oculus 2 controller?” Use rechargeable batteries and the officially licensed Anker Charging Dock for Oculus Quest 2 equipped with custom battery covers to charge Oculus 2 controllers. 

Step 1: Remove the Original Battery Covers

Slide off the standard battery covers from both Quest 2 controllers to expose the battery compartments.

Step 2: Take Out Existing Batteries

Remove the current AA batteries from each controller and set them aside for recycling or other uses.

Step 3: Insert the Rechargeable Batteries

Place the rechargeable batteries included with the Anker Charging Dock into the battery compartments. Ensure the charging contacts face the correct direction, matching the polarity markings.

Step 4: Attach the Dock-Specific Covers

Replace the original battery covers with the custom ones provided with the charging dock. These covers feature external contacts designed for charging compatibility with the dock.

Step 5: Place Controllers on the Charging Dock

Position the controllers onto the charging dock. Align them correctly so the charging contacts on the covers connect securely with the dock.

Step 6: Check Charging Status

Look for the indicator lights on the charging dock to ensure the controllers are charging properly. Typically, lights will illuminate to confirm a successful connection. How long to charge Oculus Quest 2 controllers? From a completely depleted battery, it should typically take about two and a half hours to complete a full-charge battery.

Step 7: Charge the Headset (Optional)

For added convenience, while charging Meta Quest 2 Controllers, place the headset on the dock alongside the controllers to charge everything simultaneously.

Conclusion

Buying an advanced modern console like the Oculus Quest 2 can be exciting to enjoy great gaming. However, it may be frustrating if you are not sure how to make full use of it. Some individuals may perceive it as broken or defective right off the bat.

However, this isn’t exactly the case, as I have discussed in this article. The charging operation of this VR device is unlike any smart device because it needs to change the batteries or use an Anker charging dock for Oculus Quest 2 Controllers and rechargeable batteries instead of the traditional type-C USB charging adaptor as you do for smartphones.

Hope the discussion in today’s blog on how to charge Quest 2 controllers can be a great help so that you can refer to it whenever you are not sure how to troubleshoot it.

Common FAQs About How to Charge Oculus Quest 2 Controllers

Do Oculus Quest 2 Controllers Run Out of Battery?

Yes, the package of Oculus Quest 2 comes with two pieces of AA batteries that are preinstalled in each of the controllers, allowing you to play with them right off from the box.

With this being said—it is certain that the batteries of the controllers will soon run out, especially if you are using them for long periods. But you have to take note that these batteries are not reusable and do not attempt to recharge them when they become completely depreciated.

How Long Do Oculus 2 Controllers Batteries Last?

The Oculus Quest 2 controller battery size is double “A” batteries, and such a disposable battery can last for at least a month or depending on the frequency of usage.

Once you have noticed that the controllers are becoming less and less responsive, and then it is likely that your batteries are rapidly depreciating as well, and you might need another pair of double A’s for replacement.

You may want to consider rechargeable batteries if you’re looking for a more sustainable and cost-effective solution. Rechargeable batteries not only reduce waste but also save you the hassle of frequent replacements, making them a practical choice for avid VR users.

How to Charge Oculus Quest 2 Controllers Without Dock?

To charge Oculus Quest 2 controllers without a dock, replace the included non-rechargeable AA batteries with rechargeable ones. Use a compatible external AA battery charger to recharge them when depleted. Simply remove the batteries from the controllers, charge them in the charger, and reinsert them once fully charged.

Why Are My Meta Quest 2 Controllers Not Charging?

If your Meta Quest 2 controllers aren’t charging, common issues include:

  1. Non-Rechargeable Batteries: Standard AA batteries aren’t rechargeable. Replace them with rechargeable AA batteries and use a compatible charger, like the Anker charging dock.
  2. Incorrect Battery Installation: Misaligned terminals can block charging. Remove the batteries and reinsert them, ensuring proper alignment with the + and - markings.
  3. Dirty/Damaged Contacts: Dust or wear on the battery or dock contacts can interfere with charging. Clean the contacts gently with a dry microfiber cloth or cotton swab.

If unresolved, contact Oculus Support for further help.

Featured Articles

Be the First to Know

We use cookies to ensure you get the best experience on our website and to assist with our marketing efforts. By continuing to browse, you agree to our use of cookies and our sharing of information about your interactions on our site with our social media, advertising, and analytics partners.