top banner
Home
/
/
Blog
/
How to Reset Power Bank (Step-by-Step Instructions)

How to Reset Power Bank (Step-by-Step Instructions)

How to Reset Power Bank? And Power Bank Care Advice

If your power bank has stopped charging, there’s no need to panic or immediately consider a replacement. In many situations, a reset can resolve charging issues and restore the device’s function. This process often solves problems without the need for repairs or new purchases.

In this article, we’ll go through the general reset procedure and offer helpful tips to maintain your power bank in good working order. Following these methods may help extend the device’s performance and reduce the chances of future problems.

 

When Should You Reset Your Power Bank?

Before proceeding with the reset process, it’s helpful to recognize when a reset may be necessary. The situations below are the most frequent signs that your device may benefit from this action:

  • Inconsistent charging performance:If the power bank occasionally fails to charge your devices, this may suggest internal malfunction. A reset could restore its reliability.
  • Excessive heat: High temperatures during use may signal internal imbalance. Resetting the power bank can return it to a safer operating state.
  • Rapid battery depletion:If the battery drains much faster than expected, a reset could help recalibrate the internal battery system.
  • Incorrect battery level indicators: If the LED lights show inaccurate readings or appear frozen, resetting the power bank may restore proper functionality.
  • Unexpected shut-offs: Power banks that turn off frequently without warning may need a reset to restore consistent output.
  • Long-term inactivity: If the device hasn’t been used in a while and isn’t responding normally, a reset may help activate internal circuits again.

How to Reset a Power Bank?

Resetting most power bank models is a straightforward process. The following steps apply to many brands, whether or not the device includes a physical power button.

Step 1: Power It Off

Press and hold the power button (if available) until the device shuts down. If the power bank doesn’t include a dedicated button, disconnect it from any source of power or devices.

Step 2: Unplug All Connected Devices

Remove any cables or devices that are connected to the power bank. All ports should remain free during the reset.

Step 3: Locate and Press the Reset Button

Look for the reset button, typically found on the back or underside of the device. It may be a small pinhole that requires a pointed object to access. Press and hold the reset button for a few seconds, then release.

Step 4: Turn the Power Bank Back On

After releasing the reset button, switch the power bank back on and allow it to fully recharge before use. This helps reinitialize its internal systems properly.

How to Reset Anker Power Bank?

If your Anker power bank isn’t charging as expected, it may require a reset specific to the brand. For models like the Anker PowerCore 20000, try the following method:

  1. Connect the Micro input and USB output ports together using the supplied cable.
  2. Leave the cable connected for around 15 seconds.
  3. Disconnect the cable once the LED lights have stopped flashing.

Once these steps are completed, your Anker device should be ready to use again. After resetting, observe its behaviour to confirm that the charging process is operating correctly.

Tips for Keeping Your Power Bank in Good Condition

Whether you've just resolved an issue or recently purchased a new unit, regular maintenance will help preserve your power bank’s functionality over time. Here are some suggestions that apply to both everyday use and long-term storage:

  • Store it correctly: Keep the device in a cool, dry environment. Avoid locations exposed to direct sunlight, high humidity, or extreme temperatures, as these factors may compromise the internal battery.
  • Maintain a consistent charge cycle:Even when not in use, it’s a good idea to charge the power bank every three months. This helps prevent deep discharge, which can affect performance.
  • Use appropriate cables: Always use the cable that came with your device, or choose a reliable, third-party cable designed to match the power bank’s output. Low-quality charging accessories can reduce efficiency or cause overheating.
  • Avoid overcharging or complete discharge: Unplug the power bank once it reaches full charge, and try not to let the battery run to zero. Maintaining charge levels between 20% and 80% can improve battery longevity.
  • Keep the unit clean: Gently wipe the casing with a dry, soft cloth to remove dust and residue. Avoid using strong cleaning chemicals, which may damage the surface or ports.

Conclusion

By resetting your power bank at the right time, you can fix many problems such as irregular charging, inaccurate indicators, and overheating. With ongoing maintenance—such as regular charging, proper storage, and gentle handling—you’ll likely extend the life of your device. Simple habits like cleaning and cable care also contribute to more reliable charging on a daily basis.

FAQs

Why isnt my power bank charging?

Several factors could explain this:

  • Faulty cable: A damaged charging cable is often the issue. Swap it out and test with another compatible cable.
  • Dirty or broken port:Dust or bent connectors can interfere with charging. Inspect and clean the port using a dry, soft tool.
  • Wrong charger type:An incompatible wall adapter might not supply the correct output. Try using one recommended for your power bank model.
  • Power source problem: A faulty wall socket or USB port can prevent charging. Test a different outlet to rule this out.

How long should a portable charger last?

A quality power bank, when properly maintained, generally lasts between 1.5 and 3 years. Devices like the Anker PowerCore 20100 can support roughly 500 charging cycles, which equates to about 2–3 years for average users.

Lifespan varies based on how often the device is charged, the conditions it’s stored in, and the overall build quality. Following the above care instructions may help you get more use from your device.

What damages power banks?

Common causes of damage include:

  • Exposure to heat, moisture, or humidity;
  • Dropping or crushing the device;
  • Using cheap or incorrect cables and chargers;
  • Leaving it plugged in after full charge;
  • Operating it while connected to another power source or device.

Avoid these habits to prevent premature battery failure or safety issues.

How can I extend the battery life of my power bank?

To support battery longevity:

  • Store in a well-ventilated, cool location;
  • Avoid overcharging or full discharge cycles;
  • Use certified cables and appropriate adapters;
  • Handle with care to prevent internal and external damage;
  • Wipe it clean occasionally with a dry cloth.

With these efforts, you’ll improve your chances of long-term, dependable use.

How do I know if my power bank is broken?

These are common indicators:

  • The device doesn’t charge your phone or itself;
  • The LED lights stop working entirely;
  • It becomes excessively hotduring use or charging;
  • The battery depletes quickly, even when unused;
  • The case looks bloated or deformed.

If any of these symptoms occur, it’s safest to discontinue use and consider a new device from a reputable brand.

 

 

 

We use cookies to ensure you get the best experience on our website and to assist with our marketing efforts. By continuing to browse, you agree to our use of cookies and our sharing of information about your interactions on our site with our social media, advertising, and analytics partners.