Whole Protection S Premium Bundle

Sold Out
Whole Protection S Premium Bundle

Whole Protection S Premium Bundle

eufyCam S330 (eufyCam 3) Add-on Camera ×2:

  • See 4K Detail Day and Night
  • Forever* Power, Solar Style
  • BionicMind™ AI Differentiates Family and Strangers

HomeBase S380 (HomeBase 3) ×1:

  • HomeBase 3 Empowers Your Security Devices
  • Up to 16 TB Expandable Local Storage* (Additional Storage* Drive Not Included)
  • BionicMind™ AI Differentiates Family and Strangers

Video Doorbell S330 Add-on ×1:

  • Dual Cam Technology
  • Dual Motion Detection
  • Delivery Guard™

Entry Sensor ×2

Style

Choice

FAQ

No. It is compatible with Alexa and the Google Assistant currently. HomeKit is still undergoing development, please stay tuned.

Tests show that with full exposure to direct sunlight for 2 hours, the camera can keep working for an entire day. However, this depends on the strength of the sunlight. Install your camera in a position that exposes it to as much sun as possible. If the weather is cloudy or rainy, the power level may reduce, but it will charge up again when exposed to sunlight again. Factors such as long trigger lengths, frequent event detections, and streaming video, may use battery faster.

The solar panels charge the built-in battery while sunlight is available. If the camera's current operation uses more power than the solar panel can provide, the battery level will reduce.
These 2 factors may influence the experience:
1. The solar panels are not charging the device enough. One possibility is that the position of the camera is not allowing enough access to direct sunlight. In this case, adjust the position or location. It may also be that the weather is not ideal for solar charging. In this case, there is no need to worry. When the weather becomes sunny, normal charging will resume.
2. The current operation of the camera is consuming power beyond what is normal. In this situation, you may need to adjust the configuration to reduce false triggers and excessive recording events. Try the following:
1) Switch to Power Saving mode.
2) Reduce the sensitivity of Motion Detection.
3) Choose Human Only mode.
4) Enable Activity Zones that focus on the monitoring area. Try to avoid including public walkways or roads as movement in these areas may result in frequent false triggers.

HomeBase 3 is compatible with all eufyCam models, eufy Battery Doorbells (except E8213), and eufy Sensors. It will be compatible with all eufy Security devices in May, with the exception of eufy Wired Doorbell.

Any 5V 2.5" storage** drive (HDD or SSD) with a SATA interface.
Note: 12V storage** drives are not supported.

The motion sensor can detect objects moving 25-30 ft (8-10 m) away. Detection sensitivity, mounting height, and mounting angle will influence the detection distance of your devices. We recommend that you adjust the detection sensitivity as needed.
The installation height should not exceed 3m, and the tilt angle should not exceed 15°. Please check "In-App Setup" for more.
Objects coming directly toward the center of the camera may not always be detected. Where possible, position the camera so that movement crosses the field of view to some extent, which will assist in triggering the passive infrared motion detection.

No. The camera is battery-powered and is designed to offer a balance between battery life and event capturing.