PowerCore Jump Starter 600mAh
Anker
PowerCore Jump Starter 600mAh
The Jump Starter and Portable Charger 2-in-1
Color :
Highlights

Anker PowerCore Jump Starter 600 
Never get stranded with a dead car and phone battery again.


A Real Life Saver 
Make sure you and your loved ones can get home when stranded. This will jumpstart your 5L gas or 3L diesel engine up to 20 times on a single charge. 


Advanced Safety 
We've taken safety to another level, protecting you and your devices against surges and short circuits, as well as inverse current. 


Ultra Compact 
Unlike traditional bulky jump starter packs, it's small enough to store in your glovebox and light enough to pack in your bag.


Portable USB Charger 
Whether for emergencies or daily use, charge your phones, tablets and other devices through two USB ports. 


Fast Charging Technology 
Exclusive to Anker, our PowerIQ technology ensures full speed charging for your phones, tablets, and other USB-charged devices up to 2.1 amps per port or 4.2 amps overall. 


For Optimal Use: 

  • Charge the jump starter at least once every 4 months to avoid shortening its lifespan. 
  • Compatible with 5L and lower gas/petrol engines and 3L diesel engines. 
  • Recharge your vehicle's battery as soon as possible after jump starting. 

ATTENTION: 

  • Store at temperatures below 130° fahrenheit and avoid direct sunlight. 
  • Jump starter may not work properly at temperatures below -4° fahrenheit. 
  • If less than 25% charged, it may not be able to start your engine.
Manual & Drivers
FAQ
What should I do if the Anker PowerCore Jump Starter 600's clamp cable breaks?
Email us at support@anker.com during the 18-month warranty period to receive a replacement cable.
What should I do if the Anker PowerCore Jump Starter 600's case breaks?
Email us at support@anker.com during the 18-month warranty period to receive a replacement case.
How do I turn on the Anker PowerCore Jump Starter 600's LED flashlight?
Make sure there is power remaining on the car jump starter. Hold down the power button for 3 seconds to turn on the flashlight, then press the swith to navigate between the SOS and strobe modes.
How long will the Anker PowerCore Jump Starter 600's battery last with LED flashlight turned on?
If the LED flashlight is left on, the Anker PowerCore Jump Starter 600's battery will last for about 55 hours.
What should I do if the cable's red and green lights flash but never turn green?
Make sure the Anker PowerCore Jump Starter 600 is over 25% charged and that the cable is inserted correctly. Turn on your car headlights, connect the clamps to your car battery and wait 10 minutes. If a steady green light still hasn't come on email us at support@anker.com during the 18-month warranty period for further assistance.
What do the LCDs indicate when the Anker Car Jump Starter is charging itself or other devices?
When the car jump starter is being charged, the LCD display will display the battery's capacity throughout the charging process and it will automatically shut off after fully charging.
When the car jump starter is charging a device, the LCD display will display the battery's capacity throughout the charging process and it will automatically shut off when all the connected devices are charged or cease to draw a current.
How do I know when the clamps are correctly connected to the car?
The LED will shine a steady green light when the clamps are connected correctly. If not connected correctly, the light will flash red every two seconds.
What should I do if the Anker PowerCore Jump Starter 600 will not charge?
Try charging the Anker PowerCore Jump Starter 600 with both a 15V wall charger and car charger. If this doesn't help, email us at support@anker.com during your 18-month warranty period to receive further assistance.
What should I do if the Anker PowerCore Jump Starter 600 cannot charge other devices?
It is possible that the cable is defective; try using a different charging cable between the Anker PowerCore Jump Starter 600 and your device. Remember to switch the power button on. Email us at support@anker.com during your 18-month warranty period to receive further assistance if this doesn't fix the issue.
Can the Anker PowerCore Jump Starter 600 charge other devices while it is being charged?
No.
Can I use the Anker PowerCore Jump Starter 600 to charge other devices while jumpstarting a car?
No.
What cars are compatible with the Anker PowerCore Jump Starter 600?
The Anker PowerCore Jump Starter 600 is able to jumpstart gas engines up to 5L or diesel engines up to 3L.
How do I jumpstart a car?
"1. Turn on the Anker PowerCore Jump Starter 600 and make sure it's over 25% charged.
2. Connect the red clamp to the ""+"" end and the black clamp to the ""-"" end of the battery.
3. Make sure the jump cable indicator turns green.
4. Once it turns green, start your car. If it does not turn green, turn on the car headlights when the indicator turns green and try it again. Unplug the jumper cables from the jump starter within 30 seconds.
5. Remove the clamps from the car battery and pack away your Anker PowerCore Jump Starter 600."
How do I properly connect the Anker PowerCore Jump Starter 600 clamps to my car battery?
Connect the red clamp to the "+" end and the black clamp to the "-" end of the battery.
What is the Anker PowerCore Jump Starter 600's operating temperature?
The operating temperature is from -20 — 60°C (-4 — 140°F).
What is the Anker PowerCore Jump Starter 600's peak current?
The Anker PowerCore Jump Starter 600's peak current is 600A.
Copyright © 2017 Anker Technology Co. Limited