PowerCore+ 20100 USB-C
PowerCore+ 20100 USB-C
Farbe :

PowerCore+ 20100 USB-C
Die Premium Powerbank

Drücken Sie das LED-Power-Rad um USB-C zu aktivieren und Ihr neues MacBook mit 5V/3A zu laden. 

Optimale Geschwindigkeit
Exklusiv bei Anker: PowerIQ und VoltageBoost Technologie in Kombination liefern die schnellstmögliche Ladegeschwindigkeit von bis zu 2.4A pro Port (3A mit USB-C). 

Extra hohe Kapazität
Mit einer Kapazität von 20.100mAh kann der PowerCore+ ein reguläres Handy 7-mal wiederaufladen, bevor er selbst wieder an den Strom muss. 

Schnelles Wiederaufladen
Trotz der massiven Kapazität kann der PowerCore+ in nur 8 Stunden mit einem 2.4A Ladegerät und dem mitgelieferten USB auf USB-C-Kabel wieder aufgeladen werden. Das ist 20% schneller als ein Standard-Akku mit ähnlicher Kapazität. 

Multi-Schutz Sicherheitssystem
Kurzschlussschutz und weitere fortgeschrittene Sicherheitsvorkehrungen garantieren höchere Sicherheit für Sie und Ihre Geräte. 

• Drücken Sie das LED Power Rad bevor Sie Ihr Gerät mit dem Akku verbinden um den USB-C Output zu aktivieren.
• Verwenden Sie das mitgelieferte Kabel, Ihr Originalkabel oder ein zertifiziertes Kabel eines Drittanbieters (z.B. MFi). 
• Das inkludierte USB-A auf USB-C Kabel ist dazu gedacht um den PowerCore aufzuladen. Die Leistung in Verbindung mit anderen Geräten könnte eingeschränkt sein.
• Kompatibel mit dem neuen MacBook (mit dem mitgelieferten USB-C-Kabel), Apple und Android Smartphones, Tablets (inklusive des Nexus 7) und anderen USB-ladenden Geräten außer iPod nano, iPod Suffle, iPod Classic, HP TouchPad, Dell Venue 11 Pro, Asus Tablets sowie einigen speziellen GPS und Bluetooth Geräten.

Hinweis: Nicht kompatibel mit Dell XPS 12 9250 (2015), Dell XPS 15 (9550), Dell XPS 13 (9350) oder HP Spectre x2

  • Kapazität:20100 mAh
Can I use a different type-c cable rather than the cable that comes with the PowerCore+ 20100 Portable Charger?
Yes, you can use other type-c cables. However, to ensure compatibility and best performance, we strongly recommend using your device’s original cable, a third-party certified cable (such as MFI) or the included cable.
What kind of wall charger should I use to charge the PowerCore+ 20100 Portable Charger?
You can safely recharge your PowerCore+ 20100 in 10-11 hours using a 2.4 amp or higher output charger. Lower output chargers (such as phone chargers) will not charge as quickly or safely.
How long will the PowerCore+ 20100 Portable Charger take to be fully charged?
It takes alomost 10-11 hours to fully charge the battery with a 2.4A wall charger and almost 12-13 hours to fully charge with 2A wall charger.
How to charge the New Macbook (12-inch) via Type-C port of the PowerCore+ 20100?
To charge the Macbook 12-inch, please plug the USB-C cable into the external battery port, and then press the power button to begin charging. Otherwise, the PowerCore+ 20100 will draw current from the Macbook 12-inch instead.
What devices are compatible with the PowerCore+ 20100 Portable Charger?
The PowerCore+ 20100 is compatible with Android, Apple and almost all other devices charged via USB. It has a maximum output of 6A shared between the two normal output ports and one type-c output port. The current of two normal output ports will reach up to 3A and the type-c output port's max current will be 3A.
Does the PowerCore+ 20100 Portable Charger work with the new iPhone 6 and iPhone 6 Plus?
Yes, it also works with the new macbook and other devices that have the type-c port. But the Apple cable is not included. Please use your device's original cable.
Will the supplied Micro USB v2.0 cable compatible with the Micro USB v3.0 devices, such as Samsung Galaxy S5/Note2/Note3?
Yes, take a close look at the port and you will see the port is divided, insert the none Micro-USB 3.0 plug to the appropriate side and it will work fine.
What's the output efficiency of the PowerCore+ 20100 Portable Charger?
Approximately 30-40% of the Astro's battery capacity is unable to be used because of efficiency problems that affect all electronics devices. These include power lost from circuit heat and voltage conversions from the battery, the charging cable and your device. Your battery is able to supply 60%-70% power to other devices.
Can the PowerCore+ 20100 Portable Charger charge other devices while it is being charged?
No. It's actually very bad for the battery lifespan to allow this.
My device charges at 1 Amp, will the PowerCore+ 20100 Portable Charger’s 4.8 Amp output harm it?
No, the PowerCore+ 20100 will only supply the maximum charge current allowed by your device.
Can the PowerCore+ 20100 Portable Charger charge two devices simultaneously?
Yes, it can charge three devices simultaneously. But please note that when using 3 output ports simultaneously, the total output current will not exceed 6A.
What do the LEDs indicate when the PowerCore+ 20100 Portable Charger is charging itself or other devices?
When the PowerCore+ 20100 is charging a high-capacity device (such as the iPhone6, iPhone6 Plus , iPhone6S ,iPhone6 Plus, Nexus 6, BlackBerry 10 and iPad etc), the LED indicators will not turn off automatically. This is because when such devices are fully charged, their output current is higher than the minimum current(30-70mA)  that can be detected by Anker batteries. Please rest assured there will be no harm done to your device and that it is not drawing a current.

When the PowerCore+ 20100 is being charged, the remaining power of the LED indicators will light steadily; while the next charging LED indicator will flash. And they will turn off when the PowerCore+ 20100 is fully charged.
How long will the charge in a PowerCore+ 20100 Portable Charger last without being used?
Generally, our external batteries' static power consumption is so low it would take between 20 and 36 months to drain completely. However, It is also worth noting that the powercore's chemicals will become less active if left unused for extended periods. To extend your powercore's life, please discharge and recharge it at least once every 4 months.
Can the PowerCore+ 20100 Portable Charger be used for international travel?
Yes. Please be sure that the USB AC adapter is compatible with the voltage of the country you're travelling to. The input voltage of an adapter is usually labeled on the adapter.
Can the PowerCore+ 20100 Portable Charger be taken on board airplanes?
Yes, all external batteries with a capacity lower than 27027mAh (100 Watt Hours) can legally and safely be taken on board airplanes. To calculate a powercore's capacity in Watt Hours: (PowerCore Capacity(mAh)*3.7)/1000.

Here are the relevant requirements:
Quoted from Federal transportation security rules (Effective January 1, 2008):

Lithium ion batteries (a.k.a.: rechargeable lithium, lithium polymer, LIPO, secondary lithium).
-Passengers may carry consumer-sized lithium ion batteries [no more than 8 grams of equivalent lithium content or 100 watt hours (wh) per battery]. This size covers AA, AAA, 9-volt, cell phone, PDA, camera, camcorder, Gameboy, and standard laptop computer batteries.
-Passengers can also bring two (2) larger lithium ion batteries (more than 8 grams, up to 25 grams of equivalent lithium content per battery) in their carry-on. This size covers larger extended-life laptop batteries. Most consumer lithium ion batteries are below this size.
What should I do if the PowerCore+ 20100 Portable Charger can not be charged?
Please try a different AC adapter and Micro USB cable to see if that helps. Email us at support@anker.com during your 18-month warranty period if this doesn't fix the issue.
What should I do if the PowerCore+ 20100 Portable Charger can not charge other devices?
Please try a different charging cable between the powercore and your device. Email us at support@anker.com during your 18-month warranty period if this doesn't fix the issue.