Anker
PowerCore II 10000
The High Capacity Portable Charger with Upgraded Compatibility
$29.99
Color :
Quantity :

PowerIQ 2.0

The next evolution of our proprietary technology identifies your device to adjust voltage output—
delivering the fastest possible charge.

LEARN MORE
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
01234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge
01234567890123456789
Minto full charge
012345678901234567890123456789
Minto full charge

*Data obtained from internal testing

Massive Capacity

10000mAh of power stands ready to charge phones up to 3 times, anywhere.

0123456789
iPhone 7Charges
0123456789.0123456789
iPad miniCharges
0123456789.0123456789
Galaxy S7Charges

*Data obtained from internal testing

Superior Safety

MultiProtect, our proprietary 11-point safety suite,
ensures total protection for your devices—and most importantly, you.

  • Input High-Voltage
    Protection

  • Output High-Voltage
    Protection

  • Input Current
    Regulation

  • Output Current
    Regulation

  • Output Temperature
    Control

  • Automatic Current
    Matching

  • Output Short-Circuit
    Protection

  • Static Resistance

LEARN MORE

Full-Throttle Recharging

Dual-direction high-speed technology enables rapid battery top-ups.

PowerCore II 10000

2.5h

Standard Portable Charger

5h

  • 8-Light LED Sensor
    See how much power you have left at the touch of a button..

    8-Light LED

  • Premium Look and Feel
    Precision-cut ridged-surface provides the perfect grip and resists smudges.

    Ridged Surface

  • Incredibly Portable
    Compact size—smaller than a candy bar—specially designed
    to take absolutely anywhere.

    Handheld

Unrivaled Compatibility

Cutting-edge technology ensures the fastest possible charge for almost any device.

Exterior
Product
parameters
Capacity :
10000mAh / 36Wh
Output :
5-9V 2A, 9-12V 1.5A
Input :
5V / 2A
Weight :
195g / 6.9oz
Size :
96 x 62 x 22mm=3.8 x 2.4 x 0.9in
FAQ
Can I use a USB cable other than the one that came with PowerCore II 10000?
Yes, other cables can be used to charge your devices with PowerCore II 10000. However, to ensure compatibility and the best possible performance, we strongly recommend using your device’s original (OEM) cable, a third-party certified (MFI) cable, or the included cable.
What kind of wall charger should I use to charge PowerCore II 10000?
You can safely recharge your PowerCore in 4 hours using a quick charge charger.
What devices are compatible with PowerCore II 10000?
The PowerCore II 10000 is compatible with Android, Apple and almost all other devices charged via USB except for iPod nano, iPod Classic, HP TouchPad, Asus tablets and some GPS and Bluetooth devices.
Does PowerCore II 10000 work with the new iPhone 8 and iPhone 8 Plus?
Yes, PowerCore II 10000 can charge the new iPhone 8 and iPhone 8 Plus faster than the OEM wall charger, but an Apple charging cable is not included. Use your device's original (OEM) cable or purchase a third-party certified (MFI) cable separately.
What's the output efficiency of PowerCore II 10000?
PowerCore II 10000's output efficiency is 60%-70%. Approximately 30% to 40% of the battery capacity is unable to be used because of efficiency complications that affect all electronic devices. These include power lost from circuit heat and voltage conversions from the battery, the charging cable and your device.
Can PowerCore II 10000 charge other devices while it is being charged?
No, we have disabled this feature due to the detrimental effects it has on the lifespan of portable chargers.
My device charges at 1 Amp, will PowerCore II 10000's higher output harm it?
No, the PowerCore II 10000 will only supply the maximum output current necessary to charge your device.
How long will the charge in PowerCore II 10000 last without being used?
Generally, our external batteries' static power consumption is so low it would take between 20 and 36 months to drain completely. However, it is also worth noting that their chemicals will become less active if left unused for extended periods. To extend battery lifespan, discharge and recharge it at least once every 4 months.
Can PowerCore II 10000 be used for international travel?
Yes, PowerCore II 10000 can be used internationally. Just be sure that your USB wall charger is compatible with the voltage of the country you're travelling to. The input voltage of an adapter is usually labeled on the adapter itself.
Can PowerCore II 10000 be taken on board airplanes?
"Yes, all external batteries with a capacity lower than 27027mAh (100 watt hours) can legally and safely be taken on board airplanes.
To calculate an external battery's capacity in watt hours: (Battery mAh Capacity X 3.7)/1000.
Here are the relevant requirements quoted from federal transportation security rules:
Effective January 1, 2008: Passengers may carry consumer-sized lithium ion batteries (a.k.a. rechargeable lithium, lithium polymer, LIPO, secondary lithium) with no more than 8 grams of equivalent lithium content or 100 watt hours (wh) per battery. This size covers AA, AAA, 9-volt, cell phone, PDA, camera, camcorder, Gameboy, and standard laptop computer batteries. Passengers can also bring two (2) larger lithium ion batteries (more than 8 grams, up to 25 grams of equivalent lithium content per battery) in their carry-on. This size covers larger extended-life laptop batteries. Most consumer lithium ion batteries are below this size."
What should I do if PowerCore II 10000 doesn't recharge?
Please try a different AC adapter and Micro USB cable to see if that helps. Email us at support@anker.com during your 18-month warranty period if this doesn't fix the issue.
What should I do if PowerCore II 10000 doesn't charge other devices?
Please try using a different charging cable between PowerCore II 10000 and your device. Email us at support@anker.com during your 18-month warranty period if this doesn't fix the issue.
What do the LEDs indicate when PowerCore II 10000 is charging itself or other devices?
When PowerCore II 10000 is charging your device, the LED power meter will stay on, displaying the battery’s remaining power. The light will fade when the device is fully charged and no longer drawing a current. The last LED light will flash when the remaing power is lower than 10% and turn off when lower than 5%.
When PowerCore II 10000 is being charged, the LEDs will flash and light up one by one to show the progress of the recharge. They will turn off when the PowerCore is fully charged.
Does this product also support Qualcomm Quick Charge technology? If I have products that use Qualcomm Quickcharge 3.0, will this charge those devices at max speeds?
Our Power IQ 2.0 technology will charge your Qualcomm Quick Charge 3.0 compatible devices at full speed.
Copyright © 2017 Anker Technology Co. Limited