Anker

USB 3.0 to Gigabit Ethernet Adapter

For Windows (32/64 bit) 8 / 7 / Vista / XP, Mac OS X 10.5 or above

Color: Black



Product Features

Supports gigabit ethernet connection with high bandwidth of up to 1000 Mbps

USB 3.0 enables SuperSpeed data transfer, backward compatible with USB 2.0 / 1.1 standards

Supports backpressure routing and IEEE 802.3x flow control for full-duplex (FDX) and half-duplex (HDX) systems

Compatible with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab. Supports IEEE 802.3az (Energy Efficient Ethernet)

USB to RJ45 adapter supports Gigabit networking over USB 3.0

IEEE 802.3, 802.3u and 802.3ab (10BASE-T, 100BASE-TX, and 1000BASE-T) compatible

Crossover detection, auto-correction (Auto MDIX) and Wake-on-LAN (WOL)

Powered solely through the USB port

Three LED indicators independently indicate status

System Requirements

Supports Windows (32/64 bit) 10 / 8 / 7 / Vista / XP, Mac OS 10.5 or higher.

Does this work with Wireshark?: All Ethernet should be able to work with WireShark. WireShark simply captures traffic entering the NIC interface, and have no correlation with the NIC in use. In short, as long as the NIC is recognized by your computer, able to RX/TX traffic, then it will work with WireShark. All Ethernet should be able to work with WireShark. WireShark simply captures traffic entering the NIC interface, and have no correlation with the NIC in use. In short, as long as the NIC is recognized by your computer, able to RX/TX traffic, then it will work with WireShark.

What speed does this work at when it is plugged into a usb 2.0 port?: "The USB port is the controlling factor. The number is approximate, but a USB 2.0 is about 480 Mbit/s (mega bits per second) and USB 3 is approximately 10 times faster or about 5 Gigabits per second. Any device works at the speed of the (computer end) of which is downward compatible. Like a CD can play in a DVD drive but a DVD CANNOT play on a CD device. ( Speed is the controlling factor) "