Anker Prime Power Bank (20K, 220W)

£129.99
Anker Prime Power Bank (20K, 220W)
Anker Prime Power Bank (20K, 220W)
Anker Prime Power Bank (20K, 220W)
Anker Prime Power Bank (20K, 220W)
Anker Prime Power Bank (20K, 220W)
Anker Prime Power Bank (20K, 220W)
Anker Prime Power Bank (20K, 220W)

Anker Prime Power Bank (20K, 220W)

  • 220W Total Output: Keep your work setup powered wherever you are with 220W of power intelligently split between two USB-C and one USB-A port.
  • Take It on a Flight: Enjoy 20,100mAh (72.36Wh) of capacity to charge an iPhone 17 Pro Max 3.6 times with a compact power bank that's hand-luggage approved and ready for travel. Note: Airline rules and inflight usage may vary.
  • 140W Max Fast Charging: Fast charge your laptop with up to 140W of power with a 5A cable. Power a MacBook Pro (M4) to 50% in just 28 minutes, a 13″ iPad Pro (M4) 48 minutes, and an iPhone 16 Pro in 29 minutes.
  • High-Speed 100W Max Recharging: Recharge Anker Prime Power Bank to 50% in just 31 minutes with 100W max USB-C input. Spend less time recharging and more time doing.
  • What You Get: Anker Prime Power Bank (20K, 220W), 1 m USB-C to USB-C cable (240W), travel pouch, welcome guide, 24-month warranty, and our friendly customer service.
Faster Delivery
Standard shipping delivers within 3–7 business days and is free.
Express Shipping
Order before 12 PM for arrival in 2 business days.
£6.99
Model Number: A110B
Anker Prime Power Bank (20K, 220W)
Ultra-Fast Charging, Grab-and-Go Power
 
Prime Charging Anywhere
Packed with 220W max output and smart power control, all in a compact build designed to supercharge your office devices wherever work takes you.
 
Smart Power Delivery
PowerIQ 4.0 technology adapts in real time by identifying which devices need more power and shifting energy from low-demand ports.
 
Full Control via App
Easily monitor real-time charging status, adjust power distribution, and personalize your screensaver while tracking battery level, USB-C ports, USB-A output, and charging base input.
 
Safe Charging All Day
ActiveShield 4.0 monitors temperature over 10 million times a day to maintain safe and efficient charging for every device.
 
Compatibility
Laptops
Microsoft Surface
Lenovo ThinkPad
MacBook Air / Pro Series
Dell XPS
 
Phones
iPhone 17 / 16 / 15 / 14 / 13 Series
Samsung Galaxy S Series /Z Series
Google Pixel 9 / 8 Series
Sony Xperia Series
 
Tablets
iPad Pro Series / Air Series / mini Series
 
Other Devices
Steam Deck
 
Nintendo Switch OLED / Lite
DJI Mavic 3
Canon R5 Mark II
AirPods
And More
 
Notes:
1. This power bank supports Samsung Fast Charging 2.0 and 40W max fast charging for iPhone 17 Series.
2. To achieve 100W max input, use a 5A cable and a charger rated at 100W or higher.
Specs

Total Capacity

20,100mAh

Input:

USB-C: 5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓5A (100W Max)
Charging Base: 15~25.2V⎓5A (100W Max)

Output:

USB-C: 5V⎓3A / 9V⎓3A / 10V⎓2.25A / 12V⎓3A / 15V⎓3A / 20V⎓5A / 28V⎓5A (140W Max)
USB-A: 5V⎓3A / 9V⎓2A / 10V⎓2.25A / 12V⎓1.5A (22.5W Max)

Total Output:

220W Max

Dimensions:

43.9 × 50.5 × 147.2 mm

Weight:

510 g

FAQ

All product features can be used without logging in (tourist account). However, if you need to upload logs for troubleshooting, you must log in first.

Multiple nearby Bluetooth devices may cause pairing issues.
- Make sure Bluetooth is on for both your phone and this product, and keep them close.
- Move to an area with fewer devices.
- Press for 7 seconds to reset Bluetooth, then try again.

Make sure the network is stable. Keep the product close to your phone and keep the app open until the update completes (7 - 10 min). Do not turn off Bluetooth or charge other devices. If it still fails, contact support or upload logs in Settings.

Some energy loss (typically 30 - 45%) is normal during power conversion because of battery and circuitry design. After conversion, a fully charged 20,100 mAh power bank provides about 11,250 mAh to your devices.

Make sure the cable supports 100W (5A). Third-party chargers only provide maximum power under the PD protocol. Heating during charging is normal. To protect the battery, power may drop. Charge in a cool area and avoid powering other devices.

When charging and recharging simultaneously, output is about 70 - 80% of input. If the charger is under 30W, it may not meet device needs. Use at least 100W or pause recharging. When the battery is full, it stops recharging and resumes at about 90%.

After heavy use, the battery cells may be too warm. Recharging will resume once the temperature drops to a safe level, protecting the battery lifespan.

Small current variations can cause slight differences between the two ports. It does not affect normal use.

iPhones may pause charging at 80% to protect battery health, especially when the phone becomes warm. Charging resumes after the phone cools down. Some phones also pause at 80% when battery optimization is enabled. Check your battery settings.

A MacBook may update its charging status with a delay when using a third-party adapter. Charging has already started, but the icon may take a few seconds to change to the plug icon after the adapter is recognized.

This product has Bluetooth and a display screen. When both stay active, power use increases and the battery may drop slowly. To reduce power use, turn off Bluetooth, set a screen timeout in the app, and update to the latest firmware.

If the product hasn't paired with your phone for a long time, the screensaver clock may become inaccurate. Time may also be delayed after power-off or restart. Connect the product to the Anker app via Bluetooth to sync the correct time.

Yes. Devices may warm up during long charging or when used for gaming or video. Metal casings can feel warmer because they dissipate heat more efficiently. Use the product in a cool, ventilated place (32 - 77°F / 0 - 25°C).

- Small display differences are normal.
- Each device measures power in a different place, so results may vary.
- Cable aging and transmission loss affect readings.
- The power bank's display uses only one decimal place.

Power banks go through several aging and safety tests during manufacturing, and these tests may record charging cycles. For a new power bank, a cycle count below 12 is considered normal.